BUS 1700 Managing Operations
EOQ and Safety Stock Practice Problems
Problem 1
A local distributor for a national tire company expects to sell 9,600 steel belted radial
tires of a certain size and tread design next year.
Demand is stable, annual holding cost is
$16 per tire, and ordering cost is $75.
a) What is the EOQ?
b) How many times per year does the store order?
c) What is the total annual cost if the EOQ is ordered?
Problem 2
Daily ice cream demand at I-Scream parlor is normally distributed with a mean of 400
quarts and a standard deviation of 120.
I-Scream has its ice cream supplied by a
wholesaler who charges $8 per quart.
The wholesaler has a five-day delivery lead time,
and charges a $90 flat fee for each delivery.
I-Scream estimates that the inventory related
holding cost (i.e., cost of capital and physical holding cost, etc.) to be 25% of the dollar
value of inventory per year. I-Scream wants 90% availability.
Assume 360 days in the
year.
(z = 1.28 for A = 90%.)
[Hint: The inventory holding cost, h, can be calculated by multiplying the cost per quart
and the holding cost rate (i.e., 25%).]
a) What is the EOQ, Q*?
b) Find the optimal reorder point, ROP.
c) To reduce consumer complaints due to occasional stock-outs, I-Scream is
considering a new strategy that will require 99% ice cream availability. Quantify
the impact of this strategy on Q* and ROP. (z=2.33 for A=99%.)
Problem 3
A distributor sells 100 cases of a sports drink each week.
The distributor operates 50
weeks per year.
It takes the supplier two weeks to deliver the sports drink to the
distributor at a cost of $8 per case.
The inventory related holding cost (capital, insurance,
etc.) for the distributor is 25% of the dollar value of inventory per year.
Each order
placed with the supplier costs the distributor $20.
This cost includes labor, forms, etc.
[Hint: The inventory holding cost, h, can be calculated by multiplying the cost per case
and the holding cost rate (i.e., 25%).]
a) What order quantity minimizes the distributor’s total inventory holding and
ordering cost?
b) What is the optimal reorder point for the distributor?
c) Assuming the distributor selects the order quantity specified in part (a), how many
orders are placed per year?
d) Assuming the distributor selects the order quantity specified in part (a), what is
the distributor’s total annual inventory holding and ordering cost?
After some time, the distributor realizes that they sometimes run out of stock.
They hire
a consultant to figure out the reason.
The consultant points out that the distributor is not
taking into account the weekly fluctuations in demand and that the reorder point should
be higher.
Analyzing past data, the consultant finds that weekly demand is normally
distributed with a mean of 100 cases and standard deviation of 20 cases.
e) What is the optimal reorder point that would allow the distributor to achieve 99%
availability?
(The z-score corresponding to 99% availability is z = 2.33.)
Problem 4
Dull Computers purchases a special printed circuit board (PCB) from a supplier for use in
a new laptop.
It will take Dull Computers 1 week to transmit an order to the supplier.
After receiving the order, the supplier manufactures PCBs in 2 weeks.
Shipping PCBs to
Dull takes an additional 1 week.
Dull estimates that the average demand and its standard deviation are 10,000 units per
week and 3,000 units per week, respectively. Dull’s management would like the in-stock
rate (or availability) to be at least 98%.
a) What is the minimum safety stock that achieves 98% availability? (z=2.05 for A=0.98.)
b) Dull’s management believes that the required level of safety stock is too high, and
seeks the help of a consulting group (BS and Associates) to make some changes in
the supply chain.
BS and Associates propose building a new information system that
can transmit orders in real-time.
Thus, the project would reduce the information
transmission time from 1 week to 0 weeks.
Calculate the % decrease in the safety
stock after the implementation of this project.
Problem 5
A local company purchases paint for use in its production process.
Monthly demand is
constant at 675 gallons.
A fixed ordering cost of $25 is incurred by the company each
time an order is placed.
The paint currently costs $22 per gallon, and the manufacturer
charges an additional shipping fee of $3/gallon.
The cost of carrying the paint in
inventory is 12.5% per year.
What is the optimal order quantity?
Problem 6
Adding lead times greater than zero to the EOQ model:
a. Increases the EOQ
b. Decreases the EOQ
c. Increases the ROP
d. Decreases the ROP
e. None of the above
51作业君版权所有
