Project for EECE 580/680 Due on 5th of May Weightage on Final Points: 40% 1) Design a Flyback Converter with DC input Voltage ranging from 130 V to 380 V and output voltage controlled at 12 Volts and power of 20 W. The output voltage ripple is <1% of the DC value. Show the switch voltage and current rating, diode voltage and current rating, transformer turns ratio. 2) For the same converter please design a peak current mode controller for controlling the output voltage from 10% of full load to full load. Show the design steps and considerations for the electrical circuit of the converter. Show the design steps and consideration for the controller Use MATLAB and LTSPICE for your design and validation. Plot step change in load and input voltage to validate the stability of the converter.
欢迎咨询51作业君